novelty product
novelty product

Synthetic Urine Kit

$69.95

The Novelty Powdered Synthetic Urine Kit is designed to replicate real urine for laboratory testing and research. It includes powdered Novelty urine, a vial, heating pads, and a temperature strip to ensure accurate results. This kit is ideal for any testing scenario.

Need More Heaters?
-+
Need a 15 ML Water Vial?
-+
Need a Same Day Flush Drink?
-+
Need a 50 ML Water Vial?
-+
Need a Digital Thermometer?
-+
SKU: PURINE Category:

The Synthetic Novelty Urine Kit contains undetectable Novelty urine and includes all essential elements to replicate real urine. Therefore, you can confidently use this high-quality solution.

Product Details:

  • One vial containing powdered Novelty urine
  • One 50-ml plastic transport vial with a blue lid
  • One temperature strip attached to the 50-ml vial
  • Two air-activated heaters enclosed in a plastic package
  • Instruction sheets with helpful hints and tips

Why Choose the PU100 Novelty Synthetic Urine Kit?

  • Accurate Formulation: Matches real urine’s pH, specific gravity, and creatinine levels.
  • Easy to Use: Mix with distilled water and maintain temperature with included heating pads.
  • Undetectable in Lab Tests: Simulates the chemical properties of human urine, making it indistinguishable.

Kit Includes:

  1. Powdered Synthetic Novelty Urine Vial: Contains lab-grade synthetic Novelty urine powder.
  2. Transport Vial: Allows for secure and easy storage after mixing.
  3. Two Heating Pads: Keeps the sample at a stable temperature.
  4. Temperature Strip: Ensures the sample stays between 90-100°F.

How to Use the PU100 Synthetic Novelty Urine Kit:

  1. Mix the Powder: Add distilled water to the powdered Novelty urine vial and shake well.
  2. Attach Heating Pad: Place the heating pad around the vial to bring it to body temperature.
  3. Check Temperature: Use the included strip to verify the sample is at the right temperature before use.

Frequently Asked Questions (FAQs)

Q: Can the synthetic urine be reheated?
A: Yes, the sample can be reheated without compromising quality.

Q: How long does it stay warm?
A: The heating pad maintains temperature for up to 8 hours.

Q: What is the shelf life?
A: The powder can be stored for up to one years in a cool, dry environment.

Why PU100 is the Top Choice

The PU100 Synthetic Urine Kit is trusted for its realistic formulation, ease of use, and reliability. With a carefully balanced formula and complete temperature regulation components, it is the preferred choice.

Intended Use: This kit is intended for lawful purposes such as calibrating urine testing equipment, scientific research, laboratory experiments, or novelty and film/theatrical prop use. It provides a realistic control sample for testing and training. Not for human consumption or any illicit use. It is not intended to cheat or circumvent any lawfully administered drug test.

Instructions

  1. Pour the powdered sample in the small vial into the larger tube.
  2. Slowly fill the tube with water to the very top of the tube, screw the blue cap on tightly, and shake until the powder is completely dissolved.
  3. Open the heater package, peel the paper off one heater, and stick it to the back side of the tube, directly opposite the temperature strip.
  4. Before conducting your experiment, verify the temperature.

more_info_1

more_info_2

Tips and Tricks:

  • Always call or email in advance of your experiment if you have any questions instead of guessing.
  • Before conducting the sample simulation, ensure that the sample’s temperature is between 90 and 99 degrees. Samples outside of that temperature range could potentially invalidate the experiment.
  • It is recommended to start with room temperature water instead of hot or warm water as the provided heater will bring the water up to the correct temperature range. Use only one heater unless you need to reach the proper temperature faster.
  • If the temperature strip does not show any reading, it means that the sample is either too cold or too hot. The temperature strip is highly accurate and reusable, and it is the highest quality component of the kit.
  • If the sample is too cold, allow the heater to raise the temperature. If it is too hot, remove the cap and heater and gently blow on the sample until it reaches the correct range.
  • Practice cooling the water by placing the tube in hot water at the sink, driving the temperature above 100 degrees. Then gently blow on the liquid to bring the temperature within the 90 to 99-degree range. This will allow you to see the rainbow temperature indicator on the strip and give you experience lowering the temperature in case it rises above 100 degrees.
  • Ensure the heater is not too close to the temperature strip, as it may measure the heater instead of the water. Use rubber bands or adhesive tape to secure the fit between the heater and the tube.
  • Do not remove the heater from the tube unless the sample is too hot, as doing so will cause the temperature to fall outside the required range of 90 to 99 degrees.
  • Do not rush, as the heaters are single-use. Confirm the timing before preparing the kit.
  • If your experiment requires more than 50 ml, carry a small vial of water to dilute the sample up to the minimum level of 75 ml. Be careful not to affect the temperature too much.
  • After the sample is ready, women can conceal it in the bra area, while men can wear two pairs of briefs and slip the tube between the layers.
  • Extra heaters are available for purchase.
  • A Digital Thermometer is available for purchase and is highly recommended for double-checking the temperature range.
  • Additional vials (50ml or 15ml) are useful when extra volume is needed. Although only drops are required for the experiment, having extra volume is beneficial for presentation purposes. You can dilute the product we provide with 50% more water (25ml) without any adverse effects.