Synthetic Urine

Synthetic Urine Temperature Controlled Powdered Urine


Out of stock

SKU: PURINE-3. Categories: .
  • Description
  • Directions
  • Product FAQ

The Synthetic Urine kit consists of the following basic components:

  • The powdered urine vial is supplied in a 50-ml plastic container with an air-activated heater
  • The heater takes approximately 15 minutes to heat the water in the vial to a temperature range of 90-99 degrees Fahrenheit
  • The temperature strip is highly accurate and reusable, capable of reading temperatures between 90 and 100 degrees Fahrenheit 90 and 100 degrees Fahrenheit


  1. Pour the powdered urine in the small vial into the larger tube.
  2. Slowly fill the tube with water to the very top of the tube, screw the blue cap on tightly, and shake until the powder is completely dissolved.
  3. Open the heater package, remove the paper backing from it, and affix it to the back of the tube, directly opposite the temperature strip.
  4. Take the Urine sample into the bathroom, check the temperature, and submit it to the facility instead of your own.

The Urinator is very easy to use. It is very important that you practice at home, READ THE MANUAL and feel comfortable before using it in a testing situation.

1. Use the provided syringe and fill the fluid bag with approximately 80 ml of warm water or warm clean urine.

2. Remove as much air from the bag as possible and screw cap back on the end of the tube.

3. Attach your two Duracell 9-volt batteries and fold fabric shut, making sure to secure the ends.

4. Once your temperature indicator on the bag is reading 98 to 100 you are ready to give your sample.